back to list
100857
10
M12
23
12
15,5
33
54
32
70,5
21
13,5
9
0,14
KA-STK2RS: Rod ends, male thread, maintenance required, sealed
Special version
Plain bearing
2RS-Sealing
Maintenance required steel/bronze
Female left hand thread
Standard
100857
Inner ring: Antifriction bearing steel, hardened, ground, polished.
Bearing shells: Both shells made of heavy-duty bronze have a male thread and are screwed into the housing together with the inner ring, secured with the rubber bellows.
Rubber bellows: Synthetic rubber with vulcanized brass slip ring and steel locknut.
Housing: free-cutting steel, galvanized and chromated.
Bushings: Tempering steel, hardened, bore and outside diameter ground, pressed into the inner ring. They are only used as intake of the brass abrasive rings of the rubber bellows. Due to their low thickness they are not dedicated to transmit radial and axial forces into the spherical bearing.
Lubrication nipple: DIN 3405, Shape D.
Tolerances: To DIN ISO 12440-4, schedule K, except: d = H8, B = +- 0,3
Note: With these rod ends, it is important to ensure that the tilt angle specified in the table is not exceeded, either while mounting or during operation, otherwise the rubber bellows may be damaged.
back to list
Please note our terms of use.